CNC milling machine on bench Brand: Travis Model: MM-4 Year: 2017 Control: Fagor 8055i Table...
Details

Single-phase band saw Brand: OPTISAW Model: S 275 NV Weight: 185kg Type: Manual Power: Singl...
Details

Brand: IBARMIA Model: 35 CA Capacity: Up to 35mm drill bit Features: - Transmission: By gears...
Details

Column drill with gears Brand: Ibarmia Model: 50-CA Type: Gears Feed: Automatic (3 advances) ...
Details

Milling machine with turret Brand: Lagun Model: FTV-4 Fagor NV 300M Display - 3 axis Working ...
Details

Used Lathe Brand: Amutio Cazeneuve Model: HB 575 Distance between centers: 1,000 mm Diameter ...
Details

Conventional lathe Brand: AP (Antonio Puigantell) Model: E.2-300 Weight: 2250kg Distance betw...
Details

CNC lathe Brand: Travis Model: TR-2 Year: 2006 CNC: Fagor 8055T Hydraulic chuck 300mm Dista...
Details

CNC machining center Brand: Travis Model: M800 Year: 2006 CNC: Fagor 8055B-M *DOES NOT HAVE ...
Details

CNC milling center Brand: Travis Model: M-1500 SL Year: 2014 Cnc: Fagor 8055 M Travel (X, Y,...
Details

CNC machining center Brand: Pinnacle Model: LV-126 Year: 2008 Weight: 6,800kg Cnc: Fagor 805...
Details

CNC machining center Brand: Kaukan (L&W Machine Tools) Model: Cinch Mill30SB Year: 2006 Weigh...
Details

Drill press Brand: Foradia Model: GH 50-1000 Serial no.: 5080 Drilling capacity: 50mm Maximum rad...
Details

Brand: Gurutzpe Model: Super AT 8000/600 Distance between points: 8.000mm Diameter of turnover on...
Details

Conventional lathe Brand: Geminis Model: GE 650 Power: 12.5Hp Between-centers: 2.000mm Maximum di...
Details

Conventional Lathe Brand: Geminis Model: GE 870 Power: 12.5Hp Distance between centers: 4.000mm M...
Details

Conventional lathe Brand: ECHEA Model DN 500 No.: 4,075 Distance between points: 6.000mm Shaft pa...
Details

Electropolisher / Polisher Brand: Formis Power: 2hp Maximum wheel diameter: 275mm Wheel seat diam...
Details

Automatic bandsaw Brand: SABI Model: EB 320 A Type: Automatic straight cut Weight: 1750kg Cutting...
Details

Drill press gears Brand: Ibarmia Model: A-50 Serial No.: 158-I Type: Gears Feed: Automatic (4 ste...
Details

Brand: Pinacho Model: L1-225 Distance between centers: 1,650mm Diameter over bed: 440mm Diameter ...
Details

Sierra de cinta doble columna Brand: SABI Model: PBS 320-450 Year: 2003 The Sabi model PBS 320 ba...
Details

Used machining center Brand: HAAS Model: VF-4 Year: 07/2021 Serial number: 1183245 Working hours:...
Details

Used Machining Center Brand: Haas Model: TM-2P Year: 08/2020 Serial Number: 1170479 Working Hours...
Details

Plate 4 Claws TdeG 390 mm Measurements: Plate Diameter: 390 mm Plate Width: 80 mm Rear Base Exter...
Details

Mango Batch conical reduction MT5 Includes: 3x MT5-2 Conical Mango 3x MT5-3 Conical Mango 3x MT5-...
Details

AMF T-Slot Clamp Lot M20 Thread - 13 Units The lot price includes all units Includes: * 1 Unit ( ...
Details

Lot of Slot T T AMF M16 - 17 Units The price of the lot includes all units Includes: * 4 Units ( ...
Details

Batch of DIN 6388 Tweezers + ISO 40 Cone Includes: * Wooden Case * ISO 40 Cone * 18 DIN 6388 Twee...
Details

Universal Dividing Plate MOD. ALFA 2 Features: * Plate Diameter of 3 Jaw - 155 mm * Plate Diamete...
Details

EMCO PC MILL 125 CNC Machining Center Siemens Sinumerik Brand: EMCO Model: PC MILL 125 Serial No....
Details

Used LETAG E-5 250 mm foot grinder Manufacturer: LETAG Model: E-5 Maximum diameter: 250 m/m Maxim...
Details

JASHONE M-215 E Lathe Distance between centers: 1,000 mm Shank pitch: 110 mm Swing over bed: 600 ...
Details

Used Pinacho L1-260 Lathe Center spacing: 1625 mm Maximum swing over bed: 520 mm Neck length: 350...
Details

Variable-axis multi-spindle head VH 064 used Variable-axis multi-spindle head Features: Spindle t...
Details

Used Erlo TCA70 drill press with coordinate table Used drill press Includes coordinate table and ...
Details

Used MRF FU-145 Universal Milling Machine Used Universal Milling Machine Features: 10 speeds (fro...
Details

GURUTZPE SUPER-A lathe with 325mm spindle travel. Second-hand GURUTZPE lathe Viewer: FAGOR Model:...
Details

Used ERLO column drill with motorized bed, model TCA-50. Used column drill Features: - Coolant sy...
Details

High-capacity band saw with roller feeding MG model BMSO 320L Semi-automatic band saw used - High...
Details

Second-hand Ibarmia A-50 geared column drill Features: - Automatic feed (4 feeds) Cooling system ...
Details

Used CEA M2E Conventional Milling Machine Conventional milling machine Technical characteristics:...
Details

AYCE AC 1000 K4 Horizontal Boring-Milling Machine with Continuous Feed Rate and Heidenhain TNC124...
Details

Hermle U740 4-axis machining center on machine + 1-axis with Spirsin indexer. Heidenhain iTNC 530...
Details

A grinding machine Brand: Zubida Motor: 3Hp Power: three-phase 380V Wheel diameter: 350mm *D...
Details

Sawing machine / Grinder / Deburring machine Brand: SACIA Model: L-500 Power: Three-phase 380V...
Details

Shaping / Planing and Shaping Machine Brand: CMZ Model: L-625-E Power: Three-phase 380V (the ...
Details

Electropolisher Brand: Superlema Model: P-1 Motor: 1hp RPM: 2800
Details

Electric threading machine Brand: Super Ego Model: REX 80A DX Year: 1986 Single-phase 220v P...
Details

Used bandsaw Brand: FAT Model: 270 M Year: 2000 Motor: Three-phase, 380V. Manual bandsaw wit...
Details

Semi-automatic bandsaw Brand: MG Model: K 300 SA Year: 2006 Type: Semi-automatic Jaw clamp t...
Details

Brand: MG Model: HU 45 R Year: 2004 Capacity: Up to 45mm drill bit Power: Three-phase 380V F...
Details

Brand: HELLER Model: B-35E Capacity: Up to 35mm drill bit Features: - Transmission: By gears....
Details

Brand: MUGUI Model: M-40-A Capacity: Up to 40mm drill bit Features: - Transmission: By gears....
Details

Brand: ERLO Model: TSAR-32 Serial No.: 690/605 Year: 1996 Capacity: Up to 35mm drill bit Fea...
Details

Gear spindle drilling machine Brand: Ibarmia Model: 45-CA Type: Gears Drilling capacity: 45mm...
Details

Drill press Brand: ASA Model: 32 Type: Belt Capacity: 32mm Speeds: By means of a toothed bel...
Details

Radial drill used Brand: TAGO Model: M-900 Flag: 900mm Drill capacity: 40mm Solid rotating t...
Details

Automatic drilling cycles Brand: AIKARTU CICLO-MATIC Model: TCOR Year: 2006 Power: Three-phas...
Details

Brand: MG Model: BMT 465 BT Year: 2001 Features: - Gear transmission - Electronic speed vari...
Details

Brand: Erlo Model: TC-25 (3 Units) Transmission: Gear-driven Feeds: Manual Capabilities: 25mm...
Details

Lathe machine Brand: Cumbre Model: 60 Distance between centers: 1.500mm Lead screw pitch: 40mm Sp...
Details

Drill press gears Brand: Ibarmia Model: A-50 Serial no.: 222-A Type: Gears Feed: Automatic (4 fee...
Details

Cutting disc aluminum saw Brand: MG Saw Model: TL-250 Type: manual 1 speed of cutting Maximum dis...
Details

Brand: Wood Band Saw Model: MJ346 Diameter of upper and lower drums: 600mm Distance between drums...
Details

Pneumatic tapping machine Brand: CMA Model: NR Serial number: 2307 Year: 2001 Maximum tapping cap...
Details

Satellite threader multiple passes Brand: EBA Model: 2R-65 Working piece diameter: 10 - 60mm Incl...
Details

Widia Mitsubishi MTTR435502 Inserts Plates The price includes all inserts Includes: 1x Box of Wid...
Details

Widia Tungaloy TCP18R100F-010 inserts The price includes all inserts Includes: 1x Widia Tungaloy ...
Details

Mitsubishi Widia inserts plates MGTR43150 The price includes all inserts Includes: 1x Box of Mits...
Details

Widia Tungaloy DGM2-020 Inserts Chips The price Includes all inserts Includes: 1x Box Widia Tunga...
Details

Widia Tungaloy DGM3-020 Inserts Plates The price includes all inserts Includes: 1x Box of Widia T...
Details

Widia Tungaloy DGG300-020 Inserts Plates The price includes all inserts Includes: 1x Box Widia Tu...
Details

Widia Mitsubishi Inserts Plates GPMT090304 The price Includes all the inserts Includes: 1x Box Wi...
Details

Widia Tungaloy TNMG160404 Inserts The price includes all the inserts Includes: 1x Box Widia Tunga...
Details

Widia Mitsubishi CNMG120404-MA Inserts The price includes all inserts Includes: 1x Box Widia Mits...
Details

Widia Mitsubishi CNMG120408-MA Inserts Plates The price includes all inserts Includes: 1x Box Wid...
Details

Widia Mitsubishi Inserts Plates XCMT150304 The price includes all inserts Includes: 1x Box of Wid...
Details

Widia Mitsubishi DCMT11T304 Inserts The price includes all inserts Includes: 1x Box Widia Mitsubi...
Details

Widia Tungaloy 22IR50ISO Inserts Plates The price includes all inserts Includes: 1x Box Widia Tun...
Details

Widia Tungaloy 16ER20TR Inserts The price includes all inserts Includes: 1x Box Widia Tungaloy 16...
Details

Widia inserts Aibertools SCMT120408 plate The price includes all inserts Includes: 1x Box Widia i...
Details

Widia Mitsubishi inserts plates SOMX063005-UM The price includes all inserts Includes: 1x Box of ...
Details

Widia Mitsubishi Inserts Plates SOMX062905-UH The price includes all inserts Includes: 1x Box of ...
Details

Widia Mitsubishi TNMG160404 Inserts Plates The price includes all inserts Includes: 1x Box of Wid...
Details

Widia Mitsubishi TCMT16T304 Inserts The price includes all inserts Includes: 1x Box of Widia Mits...
Details

Widia Mitsubishi TCMT16T308 Inserts Plates The price Includes all inserts Includes: 1x Box Widia ...
Details

Tool holder with inserts + Widias CCGT0602 Price includes tools and all inserts Includes: Insert ...
Details

Manual Milling Divisor MT3 Morse Taper Clamp Morse taper clamp Point Plate Diameter: 125 mm Inclu...
Details

47 mm Milling Steady Rest Dimensions: Steer Bar Diameter: 47 mm Distance from Center of Steer Bar...
Details

Router Bit Holder for Milling Machine, ISO 30 Taper Dimensions: Router Bit Holder, 448 mm Length ...
Details

Grinder Wheel on Lathe Motor: * A: 2.1 / 1.2 * Kw: 0.37 * HP: 0.5 * RPM: 1450 * Frequency: 50 Hz ...
Details

Lathe-mounted Router to hold milling cutters Features: Motor: * HP: 0.5 HP * Three-phase 220V * A...
Details

Cylindrical grinder Wheel on Lathe Features: Motor: * A: 2.1 / 1.2 * Kw: 0.37 * HP: 0.5 * RPM: 14...
Details

Grinding Wheel Lathe AGUIRENA Features: Motor: * Type: UM-90SS-4 * Three-phase 220 / 380 * A: 2.1...
Details

Grinder Wheel on Lathe FORMIS Features: Motor: * HP: 0/6 * RPM: 2800 * Phases: 3 * Three-phase 22...
Details

Faceplate for Lathe 3 Jaws 190 mm Features: Plate Diameter: 190 mm Rear Inner Diameter: 150 mm Ch...
Details

Chuck plate Mecatecnica RHV 250 Characteristics: Plate Diameter: 250 mm Barrel Pitch: 80 mm Point...
Details

Lathe Plate 4 Jaws 310 mm Features: Plate Diameter: 310 mm Plate Width: 120 mm Bar Pitch: 100 mm ...
Details

Workpiece Stop ATORN - 3 Dimensions: Width: 39 mm Length: 150 mm Bolt Length: 120 mm *For T-shape...
Details

Workpiece Stop ATORN Dimensions: Width: 39 mm Length: 150 mm Bolt Length: 190 mm *For T-shaped sl...
Details

Lathe Chuck Plate 3 Jaw Includes inner and outer jaws. Features: Plate Diameter: 250 mm Rear inne...
Details

Mechanical Vise 200 mm Features: Jaw Length: 200 mm Jaw Opening: 200 mm Distance between bolt cla...
Details

Mechanical Vise 250mm Features: Jaw Length: 250 mm Jaw Opening: 218 mm Distance between bolt clam...
Details

Mechanical Vise 250mm Features: Jaw Length: 250 mm Jaw Opening: 325 mm Distance between bolt clam...
Details

Manual Divider with TdeG Plate Features: Rear Clamping Diameter: 125 mm Inner Rear Clamping Diame...
Details

4-Jaw Lathe Chuck 265 mm + Set of 4 Jaws Features: Chuck Diameter: 265 mm Back Inner Diameter: 22...
Details

Lathe Chuck Plate 3 Jaws 105mm + 3-Jaw Set Features: Plate Diameter: 105 mm Rear Inner Diameter: ...
Details

Squaring guide for Milling Machine 275x200 mm Measurements: Height: 275mm Width: 200mm Length: 25...
Details

190 mm Lathe Chuck Features: Chuck Diameter: 190 mm Back Spindle Bore: 150 mm Spindle Pitch: 55 m...
Details

Set of Morse Taper Drills and end mills with Shank Includes: 1x Morse Taper Drill MT4 ( Diameter:...
Details

3-Jaw Chuck Plate for Lathe 250 mm Specifications: Plate Diameter: 250 mm Rear Inner Diameter: 20...
Details

Universal Dividing Head ZEATZ *Divisor incomplete, delivered as is. Features: Point Height: 115 m...
Details

Table holding T-slots for milling machine Manually movable sliding table. Features: Total Length:...
Details

Mecatecnica DSU3100 Divider with Point Features: Height from Base Point to Center: 100 mm Inner P...
Details

Lunettes for Milling Machine 49 mm Measurements: Bar pitch: 49 mm Distance from center to base: 1...
Details

NEUMATIC STATION TABLE TELMATIC TR220/1 Measurements: Base Square: 225 x 225 mm Platen Diameter: ...
Details

METBA MB1 Milling Lathe Lunettes Features: Bar clamp pitch: 17mm and 20mm Center-to-base distance...
Details

Wrench guard for Milling Machine 56mm Measurements: Bar pitch: 56 mm Center-to-base distance: 105...
Details

Divisor Plano Mecatecnica PHVD 320 Characteristics: Diameter Plate: 320mm Vertical Base Measureme...
Details

D'Andrea TRM 50/50 Boring Head, ISO 40 Taper Features: Manufacturer: D'Andrea Designation: TRM 50...
Details

Ceratizit 16 ER ISO CCN20 Widia Inserts Price includes all inserts; boxes contain 13 units in tot...
Details

Atorn 16 IR Widia Inserts Price includes all inserts; boxes contain 18 units in total. Condition:...
Details

Atorn 16 ER Widia Inserts Price includes all inserts; boxes contain 18 units in total. Condition:...
Details

Korloy XOMT 060204-PD Widia Inserts Price includes all inserts; box contains 8 pieces. Condition:...
Details

Korloy XOMT 050204 Widia Inserts Price includes all inserts; box contains 4. Condition: New
Details

Korloy XOET11T306 Widia Inserts Price includes all inserts; boxes contain 20 units in total. Cond...
Details

Korloy Widia Inserts WDKT080316ZDSR Price includes all inserts; box contains 8 pieces. Condition:...
Details

Widia Inserts TCF0402 / TCF0502 / TCF0602 Price includes all inserts; boxes contain 28 units in t...
Details

Ceratizit TCMT 110204EN Widia Inserts Price includes all inserts; box contains 9 pieces. Conditio...
Details

Kaiser TPGT 070202 Widia Inserts Price includes all inserts; box contains 3 pieces. Condition: New
Details

Iscar TPGX 090202-L Widia Inserts Price includes all inserts; box contains 2 pieces. Condition: New
Details

Iscar SOMT060204-DT Widia Inserts Price includes all inserts; box contains 6 pieces. Condition: New
Details

Korloy Widia Inserts SPTM060205-PD Price includes all inserts; box contains 8 pieces. Condition: New
Details

Cinnamon Widia Inserts SCMT09T308TN15 Price includes all inserts; box contains 7 pieces. Conditio...
Details

Korloy Widia Inserts SPET11T308 Price includes all inserts; boxes contain 19 pieces. Condition: New
Details

Korloy Widia Inserts SEKN1203AFSN Price includes all inserts; boxes contain 20. Condition: New
Details

Widia Dijet SEKT1204AFTN Inserts Price includes all inserts; box contains 4. Condition: New
Details

Cinnamon Widia Inserts SCGT32.52-ALKM15 Price includes all inserts; box contains 9 pieces. Condit...
Details

Sumitomo SDMA322T Widia Inserts Price includes all inserts; box contains 4. Condition: New
Details

Atorn VCGT160401-FFM Widia Inserts Price includes all inserts; box contains 5. Condition: New
Details

Widia Inserts Atorn RS11.0815 Price includes all inserts; box contains 6 pieces. Condition: New
Details

Widia Inserts Atorn RS008.0100 Price includes all inserts; box contains 4. Condition: New
Details

Inserts Price includes all inserts; box contains 8 pieces. Condition: New
Details

Ingersoll RHKW1003MOTN Widia Inserts Price includes all inserts; box contains 4. Condition: New
Details

Korloy RPMT1204M0-Q Widia Inserts Price includes all inserts; boxes contain 20 pieces. Condition:...
Details

Korloy LNMX060310R Widia Inserts Price includes all inserts; box contains 7 pieces. Condition: New
Details

Widia Inserts Atorn LS014 Price includes all inserts; boxes contain 12. Condition: New
Details

Cinnamon Widia Inserts LS14.0510.01TL20 Price includes all inserts; box contains 5. Condition: New
Details

Ceratizit Widia Inserts OFHT050410 Price includes all inserts; box contains 10 pieces. Condition:...
Details

Iscar GiQR 8-1.20-0.05 Widia Inserts Price includes all inserts; box contains 4. Condition: New
Details

Ceratizit CCGT120402FN Widia Inserts Price includes all inserts; box contains 1 unit. Condition: New
Details

Korloy Widia Inserts CCET030102L Price includes all inserts; boxes contain 19 pieces. Condition: New
Details

Sumitomo APET 103504PDFR-S Widia Inserts Price includes all inserts; boxes contain 51 pieces. Con...
Details

Iscar AE16-0 Widia Inserts Price includes all inserts; box contains 8 pieces. Condition: New
Details

Cinnamon Widia Inserts ADMW1503R Price includes all inserts; boxes contain 19 units. Condition: N...
Details

Cinnamon Widia Inserts ADMT1503R5.0 Price includes all inserts; box contains 6. Condition: New
Details

Sumitomo AXMT 060204PDERH Widia Inserts Price includes all inserts; box contains 6 pieces. Condit...
Details

Iscar HM90 APCR 100304PDFR-P Widia Inserts Price includes all inserts; box contains 9 pieces. Con...
Details

Sumitomo AXET 123508PEFR-S Widia Inserts Price includes all inserts; boxes contain 20 units total...
Details

End Mills 63 and 80mm ISO 40 Cone + Widias SNMX / SNEX1206ANN Includes: 1x Korloy RM8ACM4080HR-M ...
Details

Drill Chuck ISO40 Cone 43mm + Widias SPMT / XOMT15M5 Includes: 1x Drill Chuck Korloy K3D43040-15 ...
Details

Drill Chuck ISO40 Cone 35mm + Widia SPMT / XOMT11T3 Includes: 1x Drill Chuck Korloy K3D35032-11 w...
Details

25 to 63mm End Mills with ISO 40 Taper + AXET / AXMT170508 Widia Inserts Includes: 1x Sumitomo El...
Details

Insert Holder Tool + CCMT1204 Widia Inserts Includes: 1x Insert Holder Tool 1x Box of CCMT120408-...
Details

63mm End Mills with ISO 40 Taper + LNMX / LNEX100605 Widia Inserts Includes: 1x Korloy RM4PCM3063...
Details

Tool Holders + Widias CNMG120404 Includes: 3x Tool Holders * Clamp: 22mm / Total Length: 145mm * ...
Details

Korloy 28mm Insert Holder Drill + SPMT/XOMT0903 Widia Inserts Includes: 1x Korloy E3D-28032-09 28...
Details

Korloy 21.5mm Chipbreaker Drill + Widias XOMT/SPMT07T Includes: 1x Korloy K3D21525-07 21.5 mm Chi...
Details

PCLNR2020-K12 Insert Holder and CNMG120408 Widia Inserts Includes: 1x PCLNR2020-K12 Insert Holder...
Details

Ceratizit XLCFN 3203-SX3 Parting Insert and Widia Inserts Includes: 1x Ceratizit XLCFN 3203-SX3 P...
Details

25mm Milling Cutter and Widia Inserts APKT1604 Includes: 1x Schneider 25mm Milling Cutter 2x Widi...
Details

20mm to 50mm End Mills and APKT / APLX 1003 Widia Inserts Includes: 1x ATORN 11117450 50mm End Mi...
Details

12 mm Milling Cutter and APMT0602 Widia Inserts Includes: 1x KORLOY AMS1012HS-3 12 mm Milling Cut...
Details

WNMX09T316ZNN Widia Cutter and Inserts Includes: 1x HRMDM0925 Cutter 1x Box of Korloy WNMX09T316Z...
Details

Burrs 16 and 40mm + Widia inserts APMT0903 Includes: 1x AMCM15040HS milling cutter 40 mm 1x AMS15...
Details

CHICK QWIK-LOK Clamp MBAS1040 Features: Clamp: 100 mm Total Length: 400 mm Spacing: 150 mm Metric...
Details

Autowell ALQ-160G/HV Mechanical Vice Features: * Base Length: 515 mm * Total Length: 603 mm * Jaw...
Details

Autowell ALQ-160G/HV Mechanical Vice Features: * Base Length: 515 mm * Total Length: 603 mm * Jaw...
Details

Autowell ALQ-160G/HV Mechanical Vice Features: * Base Length: 515 mm * Total Length: 603 mm * Jaw...
Details

Autowell ALQ-160G/HV Mechanical Vice Features: * Base Length: 515 mm * Total Length: 603 mm * Jaw...
Details

MZ Precision Boring Tool Set, ISO 30 Taper Boring Capacity: 3 - 100 mm Reading Accuracy: 0.005 mm...
Details

Long Drill Bit Set, 8mm to 10mm in Diameter Includes: * Diameter 8 - Length from 165mm to 500mm (...
Details

SCHAUBLIN ECR Quick-Change Collet Chuck Set - 8 Units Includes: * 4 ECR25 62-25337 units (D2: 25 ...
Details

SCHAUBLIN Collet Chuck Set, ISO 10 Taper - 7 Units Short and compact tool holders Taper and face ...
Details

Mortising Milling Head For Fexac brand milling machines
Details

ZEATZ Universal Dividing Head Features: * Point Height: 175 mm * Morse Taper 5
Details

Autowell AVQ-125G/HV Mechanical Vice Features: * Base Length: 390 mm * Total Length: 478 mm * Jaw...
Details

Set of Milling Bars for ISO 30 Milling Machines Dimensions: 670 mm long milling bar * Inner diame...
Details

Set of Set Squares and Rulers for Milling Machines Measurements: Large Set Square: * Length: 397 ...
Details

Crucelegui CH-1 Tilting Clamp, 135 mm Features: Clamp Width: 135 mm Clamp Opening: 105 mm
Details

Lot of 14 Sets of 3 Jaws for Lathe Chucks Measurements: * Jaw Width: 36 to 40 mm * Jaw Center Gui...
Details

Arnold Twin-90 Hydraulic Clamp The Arnold Twin-90 clamp is a high-pressure clamp from the Fresmak...
Details

Crucelegui CH-1 Rotating Mechanical Vice Features: Total Vice Length: 335 mm Vice Width: 135 mm V...
Details

Mechanical Jaw 100 mm Features: Total Jaw Length: 270 mm Jaw Width: 100 mm Jaw Opening: 134 mm
Details

Hydraulic Clamp 115mm Features: Total Clamping Length: 350mm Clamp Width: 115mm Clamp Opening: 190mm
Details

Hydraulic Clamp 140 mm Features: * Total Clamp Length: 465 mm * Clamp Width: 140 mm * Clamp Openi...
Details

Lathe Chuck with Base 135 mm Features: Clamp Diameter: 135 mm Shank Pitch: 35 mm Base Measurement...
Details

BISON 4-Jaw Automatic Chuck for 200 mm Lathe Condition: New Dimensions: * Chuck Diameter: 200 mm ...
Details

Lot 11 4-Jaw Lathe Sets 4-jaw sets for 4-jaw hydraulic chucks Measurements: * Jaw Width: 36 to 40...
Details

Set of 4 Jaws for Lathe Chuck Measurements: * Jaw Width: 36 mm * Jaw Center Guide: 16 mm Includes...
Details

BMT 65 Haas/Doosan Cooled Combination Toolholder Features: * Machine-side connection diameter (DC...
Details

LMC 3-Jaw Lathe Chuck - 210 mm Condition: New Features: Clamping Plate Diameter: 210 mm Clamping ...
Details

ERI DIN 371 Quick-Change Tap Holder with ISO40 Taper Use: * For DIN 371 M3 - M12 taps * Insert: 1...
Details

125 mm Lathe Chuck with Metal Base Features: Clamp Diameter: 125 mm Shank Pitch: 30 mm Base Measu...
Details

190 mm Lathe Chuck with Metal Base Features: Clamp Diameter: 190 mm Clamp Width: 72 mm Inner Back...
Details

D'Andrea TS 1 Boring Head Features: Maximum boring and facing diameter * With standard tool holde...
Details

MT3 Reversible Tapping Head Set - 3 Units Includes: 3x MT3 Reversible Tapping Heads 1x MT3 Drill ...
Details

Rotating Base with Degrees For Drill Press and Milling Machine Clamps Brand: Arnold Overall Base ...
Details

TOS 3-Jaw Lathe Chuck, 315 mm Features: * Chuck Diameter: 315 mm * Chuck Width: 100 mm * Shank Pi...
Details

Lathe Grinding Machine with Grinding Wheels Includes: * 11 grinding wheels of various sizes * 1 b...
Details

Circular magnet 200mm with clamping for lathe Measurements: * Magnet Diameter: 200 mm * Magnet Wi...
Details

3-Jaw Lathe Chuck 250 mm + Jaw Sets Features: Chuck: * Chuck Diameter: 250 mm * Chuck Width: 100 ...
Details

V. COIL Thread Repair Kit M-12x1.75 Condition: New Includes: * 1x STI Short Machine Tap, Form D, ...
Details

DELFOS Lathe Grinding Wheel Features: 15,000 Series - 1 HP Motor Speeds: Normal RPM: 3,300-4,468 ...
Details

TOS Svitavy 3-Jaw Lathe Chuck, 200mm Brand new, unused chuck. Features: Brand: TOS Svitavy Includ...
Details

PL-S Precision Clamping Block Set Features: 1x Clamping Block * Total Length: 53 * Jaw Width: 37 ...
Details

ISO30 Milling Machine Tool Holder Bar Set Features: 1x ISO30 Milling Tool Holder Bar * Length: 40...
Details

Boring Head ISO 50 CONIC Taper Model: A-200 Includes wooden case and all accessories shown in the...
Details

Walter F2039 Milling Cutter Set - 2 Units Includes: 1x Walter F2039 Milling Cutter / Diameter 20 ...
Details

Galvez 3-Jaw Lathe Chuck Lightweight 3-jaw chucks with no center clearance. Body made of steel an...
Details

Galvez 250 AS 2-Jaw Chuck for Lathe 2-jaw chucks with a large opening and no center clearance, su...
Details

FEXAC 56mm Milling Machine Rest Measures: Total Base: 275mm Bar pitch: 56 mm
Details

320 mm 3-Jaw Lathe Chuck Measurements: * Chuck Diameter: 320 mm * Chuck Width: 100 mm * Shank Pit...
Details

Lathe Tool Set - 10 Units Includes: 1x PSBNL 3232-19 Tool / Square Drive 32x32mm / Length 125mm 1...
Details

Set of 2 Milling Cutters with Indexable Inserts Includes: 1x Milling Cutter with Indexable Insert...
Details

Lot of 3-Jaw Lathe Chucks Lot price includes all chucks. Includes: * 24 Sets of 3 Lathe Chucks Me...
Details

Lathe Plate 3 Jaw TdeG 160mm Used lathe plate Brand: TdeG Type: 3 symmetric jaws Includes the jaw...
Details

Spindle mounter Fitting C1011 ISO 50 Milling spindle Brand: Horma Model: C1011 Taper: ISO 50 Incl...
Details

Bushings lathe A-200 ISO 40 Lathe for milling machine ISO40 taper Brand: Conic Model: A200
Details

Base with rotary degrees For drill and milling vises Brand: Arnold Total Base Measure: 230 mm Bas...
Details

Batch of Front End Mills Cone Mango - 9 Units The price of the batch includes all units Includes:...
Details

Tapered Shank/Morse Taper End Mill Set - 8 Units M12 thread on top of the end mill. The set price...
Details

Square for Milling Machine Dimensions: Length: 295 mm Width: 398 mm Height: 300 mm
Details

Clamping Plate 3- jaw force Kitagawa B-212 for Lathe Measurements: * Plate Diameter: 304 mm * Pla...
Details

Dividing Plate 305 mm Measurements: Plate Diameter: 305 mm Shaft Pass Diameter: 80 mm Rear Base E...
Details

DIN 2080 End Mill Holder With Milling Cutter ISO 50 Taper Includes: DIN 2080 End Mill Holder With...
Details

ISO50 DIN 2080 Mandrel Barrels and End Mills Lot - 3 Units Includes: 1x DIN 2080 Mandrining Bar I...
Details

Lot of collet chucks and ISO 50 cone spindles DIN 2080 - 17 units Tightening Measures Cone: * Thr...
Details

KOMET interchangeable insert drill with ISO 50 taper Adjustable mandrel drill from 83 - 124 mm an...
Details

Drill bits with replaceable insert KOMET ABS + ISO 50 Taper Clamp Measurements Taper: * Thread - ...
Details

3-Jaw TdeG 190 mm Plate Plate type: Combined 2 clamping types: Independent and self-centering Mea...
Details

Batch ISO 50 collet set - 5 units Brand: Horma Dimensions: * Clamping Diameter - 39 mm * Clamping...
Details

Chamfered collet cone MT2, MT4 tool holder lot - 5 units The price of the lot includes all units ...
Details

Batch of Cone Mills and Mandrels Mango Cone MT1 / MT2 and MT3 The price includes all units in the...
Details

9 Tapered Cone MT5 Drill Bits - 52 to 72 mm Drill bits: 50 / 52 / 54 / 56 / 65 / 72mm 2x 50 mm 1x...
Details

33 Spiral Flute End Mills MT4 - 17.5 up to 64 mm End mills: 17.5 / 19.25 / 23 / 24 / 24.25 / 28.5...
Details

13 Cone Morse Taper Drill Bits MT3 - 23 to 28 mm Drill bits: 23 / 23.50 / 24 / 24.50 / 26 / 26.25...
Details

14 Drill Bits Cone Mango MT2 - 16 to 23 mm Bits: 16 / 19.25 / 19.50 / 20 / 21 / 22.25 / 22.50 / 2...
Details

13 Drill Bits Cone Taper MT2 - 14.50 up to 23 mm Bits: 14.50 / 16 / 16.50 / 17 / 17.50 / 18 / 19....
Details

27 Drill Bits Cone MT2 Mango - 11.50 up to 24.25mm Drill bits: 11'50 / 12 / 12,25 / 13 / 14 / 14,...
Details

Open Tailstock for Pinacho Lathe L1-310 Measurements: * Lathe diameter: 190 mm * Distance between...
Details

Fixed Point lathe 76 mm Measurements: * Total Length: 198 mm * Base Diameter: 76 mm
Details

Handle for Amutio lathe Exterior Diameter: 50 mm Interior Diameter: 35 mm Interior Square Size: 1...
Details

Open Dial Indicator for Lathe 110 mm Measurements: * Dial Indicator Diameter: 110 mm * Center to ...
Details

Plate 4 Claws 600 mm Measurements: * Plate Diameter: 600 mm * Chuck Pitch: 80 mm * Plate Width: 1...
Details

4-Claw Plate for Lathe 390 mm Measurements: * Plate Diameter: 390 mm * Hole Spacing (to be precis...
Details

3-Claw Chuck Plate for Lathe 240mm + Set of 3 Claws Plate Measurements: * Plate Diameter: 240 mm ...
Details

Flat Plate for Lathe 400 mm Measurements: * Plate Diameter: 400 mm * Plate Width: 50 mm * Thread ...
Details

4-Jaw CHIN YII Plate 400 mm Independent jaws Measurements: * Plate Diameter: 400 mm * Plate Width...
Details

Universal Dividing Head Dimensions: * 3-Jaw Plate Diameter: 190 mm * Dividing Plate Diameter: 192...
Details

Flat Plate for Lathe 445 mm Measurements: * Plate Diameter: 445 mm * Bar Feed Diameter: 65 mm * P...
Details

Rotating Base for Hydraulic Clamps Brand: Arnold Base with rotating degrees For Hydraulic Clamps ...
Details

3 Jaw Chuck Plate TdeG 250 mm Automatic self-centering tightening Measurements: * Plate Diameter:...
Details

3-Jaw Chuck Plate TdeG 190mm + set of 3 Jaws Inner and outer jaws Self-centering tightening Measu...
Details

3-Jaw Chuck Plate TdeG 160 mm Measurements: * Plate Diameter: 160 mm * Plate Inner Diameter: 125 ...
Details

Kondia B1050 Tool Change Bell Machining Center Type: Bell Number of tools: 18 ISO 40 Panasonic M9...
Details

Lathe Chuck Bed Total Bed Length: 340 mm Guideway Distance: 220 mm Weight: 29 Kg *See image with ...
Details

Flat Plate for Lathe 350 mm Features: Diameter Plate: 350 mm Plate Width: 35 mm Screw Thread Diam...
Details

Flat Plate for Lathe 378 mm Features: Plate Diameter: 378 mm Plate Width: 37 mm Shaft Pass Diamet...
Details

Flat Plate for Lathe 530 mm Features: Plate Diameter: 530 mm Plate Width: 50 mm Threaded Bar Pass...
Details

4-Jaw Chuck Plate for Lathe 315 mm Features: Self-centering tightening. Plate Diameter: 315 mm Pl...
Details

Flat plate for Lathe 695 mm Features: Plate Diameter: 695 mm Plate Width: 65 mm Threaded Shank Di...
Details

90-degree Milling Head ISO 30 - ISO 40 Head type: Angular Features: Machine mount: ISO 40 Milling...
Details

Open Guard for Lathe Maximum workpiece diameter: 107 mm Distance from Base to Center of the point...
Details

Universal dividing plate with TdeG 3G 200mm used Universal dividing plate ZEATZ Includes center p...
Details

Drill bits 22, 24, 24.5, 26, 26.5, 27, 2x30mm Set of stepped drill bit with multiple guides, coni...
Details

Faceplate for 4-Jaw Lathe 230mm + set 4 jaws Plate Diameter: 230 mm Internal Diameter: 57 mm Barr...
Details

3-Jaw Chuck Plate 190 mm for Lathe + set of 3 jaws Plate Diameter: 190 mm Inner Diameter: 47 mm S...
Details

Plate 4 Claws 190 mm for Lathe Plate Diameter: 190 mm Inner Diameter: 47 mm Barrel Pitch: 57 mm W...
Details

3-Jaw Plate for 250mm Lathe Plate Diameter: 250mm Inner Diameter: 220mm Mangowidth (Shaft Hole) P...
Details

Tapping and Die Set The price of the set includes all tools and accessories Includes: * 42 Units ...
Details

Tool holder for indexable inserts SSSCR 2525M-12 The lot price includes the tool and the insert b...
Details

Tool holder S16Q SCLCR-09 Tooling The lot price includes the tool and the insert box Includes: * ...
Details

Clamp Bit Holder S32U-CTFPR16 Chuck Bar with upper clamping to hold a positive triangular insert ...
Details

DeWalt D28710-QS Miter Saw with Disc Manufacturer: DeWalt Model: D28710-QS Horizontal handle for ...
Details

Drill press Tooling Lot The price of the lot includes all tools 1pc. Weldon MT3 chuck 1pc. Counte...
Details

Faceplate and collet holders Morse MT3 and MT4 Lot The price includes the 4 tools LAIP 0101020570...
Details

Bits 42, 47 and 72mm Box of Cone Hand Drill Bits with Morse Taper MT5 Collet Adapter The price of...
Details

Lathe chuck pack quick-change ISO 40 DIN 371 cone The price of the lot includes the 3 units Use: ...
Details

Lathe Turning HSS Tooling Lot - 24 Units The price includes all units Condition: New Includes: * ...
Details

Lote Turning Blades for Hard Metal - 23 Units The price includes all units Condition: New Include...
Details

Tough Metal Turning Blade Lot - 10 Units The batch price includes all units Condition: New Includ...
Details

Bits 60, 61, 62 and 74mm Morse Taper MT5 Cone Bit Set - 4 Pieces The price of the set includes al...
Details

Drill bits 33 x2, 38 and 40mm Morse taper cone shank drill bit set MT4 - 4 units The price of the...
Details

Drill bits 27, 33 x2, 35.5, 38, 38.25, 39, 39.75, 40, 41, 42 and 45mm Morse Taper Shank Drill Bit...
Details

Drill bits 26, 27, 29.5, 33, 33.5, 35.5, 36, 37.75, 38, 38.25, 39, 39.5, 39.75, 40, 41, 42, 43.5,...
Details

Drill bits 17.5, 20 x2 and 21mm Morse taper drill bit set MT2 - 4 units The price of the set incl...
Details

Drill bits 16, 17, 17.5, 20 x3, 20.5, 21 and 23mm Morse taper Morse MT2 Cone Drill Bit Set - 9 Un...
Details

Drill bits 16, 16.25, 17, 17.5, 20 x3, 20.5, 21, 21.75, 22 and 23 mm Cone Morse MT2 Morse Taper 2...
Details

Drill bits 17.75, 24, 24.25, 24.5, 25, 25.25, 25.5, 25.75, 26.25, 26.5, 27, 27.75, 28, 28.5, 29, ...
Details

Drills 24, 25 x2, 26, 26.5, 27, 27.75 x3, 28 and 29 x2 mm Morse MT3 Taper Shank Drill Bit Set - 1...
Details

Drill bits 17, 23.75, 24, 25, 26.5, 27, 27.75, 28, 29, 30 and 31mm Set of Metalworking Drill Bits...
Details

CNC Lathe Turret DUPLOMATIC BSV-N 120 8/25 220 380/60 Movable Inertia Maximum: 1.2 Kgm2 Tangentia...
Details

Counterpoint for lathe of a CNC lathe HARRISON ALPHA 400 "U" Measurements: Bed Channel: * Long 17...
Details

CNC Lathe Tool Lot DIN 69880 The batch price includes all tools Shank diameter of the tool holder...
Details

Tool Change Bell, ANAYAK Machining Center ANAYAK Automatic Tool Changer Type: Bell Number of tool...
Details

MG Leonard K300 Band Saw Key technical features: * 90° cutting capacities: * Round: up to 240 mm....
Details

Lot of Tool Holders for Turning Plate The price of the lot includes all tools Condition: Used Inc...
Details

TOOL PORT MT3 WITHOUT INTERNAL COOLING FOR WELDON + NITTO/UNIVERSAL 19MM, 3/4 IN. Condition: New ...
Details

Toolholder for inserts S40V-PCLNL 16 with 63 widias Condition: Used Includes: * Widia inserts CNM...
Details

M2 to M6 Drill Reamer Lot Hard Metal Machine - 15 Units The price of the batch includes all units...
Details

M3 to M12 Lot of Hard Metal Drill Bits - 18 Units The price includes all units of the lot Include...
Details

Hard Metal Machine Reamer Lot - 8 Units The price of the lot includes all units Includes: Hard Me...
Details

Lot of Hard Metal Machine Deburrers - 7 Units The price of the lot includes all units Includes: H...
Details

Machine Reamer Hard Metal - 2 Units The price of the lot includes all units Includes: Metric 16 H...
Details

Front End Mills, Spherical and Harsh Metal Bur Part - 26 Units The price of the batch includes al...
Details

Front End Mills, Spherical and Deburring - 19 Units The price includes all units of the batch Inc...
Details

Front End Hard Metal Milling Cutters - 12 Units The price includes all units of the batch Include...
Details

Ball Nose Cutters Solid Carbide - 24 Units The price includes all units of the batch Includes: So...
Details

Lot of Front End Mills and Spherical Hardened Steel End Mills - 27 Units The price includes all u...
Details

Front End Mills and Spherical Hard Metal - 10 Units The price includes all units of the batch Inc...
Details

Lot of M8/M10/M11 Tap Males - 17 Units The price of the lot includes all the units Includes: Tap ...
Details

Batch of M8/M10 Threaded Studs - 24 Units The price of the batch includes all units Includes: 8 M...
Details

M20/M12/M14/M20 Tap Threading Shank Lot The price includes all units in the lot Includes: 1 M20 6...
Details

Male Thread-cutting Lot 5/8 and M16 - 9 Units The price of the lot includes all units Includes: 3...
Details

Lot of M12/M13/M14/M18/M20 Helicoidal Taps - 7 Units The price includes all units Includes: M12 x...
Details

Batch of tapping M8/M10/M12/M14/M16 The price includes all units Includes: Tapping die R 1/2 - (1...
Details

Batch of tapping taps 14 Units The batch price includes all units Includes: Tapping taps M12 H6 -...
Details

Widia TCMT 110204 M50 inserts The price includes all the inserts in the box, the box includes 5 u...
Details

Widia ISCAR GIP 2.47-020-22D IC656 The price includes all inserts from the box, the box includes ...
Details

Widia Inserts AYMA WNMG The price includes all inserts in the box, the box includes 2 units Condi...
Details

Widia 3M 10 471L GM35 inserts The price includes all inserts from the box; the box includes 3 uni...
Details

Widia PH HORN S224.0200.52.AS66 inserts The price includes all the inserts in the box, the box in...
Details

Widia KOMET W30 26060.0561 Inserts The price Includes all inserts in the box; the box includes 10...
Details

Widia Insert Lot 16 ER 1.25 ISO / 1.5 ISO The price includes all inserts in the batch, there are ...
Details

Widia Inserts MTSJ 3.0 L30R The price includes all inserts in the box; the box includes 7 units C...
Details

KOMET W28 Insert Lot 24010.0464 / 24010.0403 The price includes all inserts from the 2 boxes Cond...
Details

Widia Kennametal A4G0305M03U026MN Inserts The price includes all the inserts from the box, the bo...
Details

Widia CERATIZIT GX24-5R4.00N-27PF Inserts The price includes all inserts of the box, the box cont...
Details

Widia PLANSEE SPMA 120408 Inserts The price includes all the inserts in the box, the box includes...
Details

Widia SANDVIK RCMT 1204 MO Inserts The price includes all inserts in the box; the box includes 3 ...
Details

Set Inserts Mitsubishi SET150R3XMM/SET200R3XMM The price includes all the inserts of the 5 boxes,...
Details

Widia ARNO LOMX 150302EN / 180404EN Insert Tool Inserts Batch Price includes the 3 boxes of inser...
Details

Widia inserts AYMA SPMT 060204 TA93 The price includes all inserts in the box; the box includes 6...
Details

WNT XCNT Inserts 170508 EN The price includes all inserts of the box, the box includes 3 units Co...
Details

DCGT Inserts 11T304FN/11T308FN The price includes the 3 boxes of inserts from the batch, 13 units...
Details

ARNO DCMT inserts 070204EN-AM The price includes all the inserts of the box, the box includes 4 u...
Details

Widia AYMA VCMT 160408/110302 Inserts The price includes the 3 boxes of inserts, 27 units Conditi...
Details

AYMA DNMG 150608 M34 Inserts The price includes all inserts in the box, the box includes 10 units...
Details

KOMET W29 10010.0484 BK84 Inserts The price includes the 2 boxes of inserts, 9 units Condition: N...
Details

Widia inserts AYMA 22 ER/IR 6 TR P30 Price includes the 2 boxes of inserts, 6 units Condition. Ne...
Details

KYOCERA TNMG 220408 inserts The price includes the 3 boxes of inserts, 22 units Condition: New In...
Details

Insert S229.0800.1077 AS62 Widia inserts HORN The price includes all the inserts from the boxes C...
Details

Inserto ONHU0705ANPR-W AH120 widia The price includes all the inserts of the box Condition: New I...
Details

Insert 2NU-DCGW11T304 Widia KORLOY Inserts Status: New Includes: * 1 box with 1 KORLOY 2NU-DCGW11...
Details

Insertos ASMT11T3ZER-HJ AH3135 carbide The price includes all the inserts in the case Condition: ...
Details

Insert 330.20-30-AA H13A Widia SANDVIK CRONOMAT inserts The price includes all inserts in the box...
Details

LNCX 18-06 AZ R-31 Inserts Widia SANDVIK COROMANT The price includes all the inserts in the box C...
Details

P28475-6 WAP35 Inserts Walter Widia inserts The price includes all the inserts in the box Conditi...
Details

HAHN+KOLB KLN 3 Widia Inserts Price includes all the inserts in the box Condition: New Includes: ...
Details

MGMN200-M Inserts Widia Korloy The price includes the box with all the inserts - 31 units. Condit...
Details

YWMT16T304-ZM Inserts T9225 Widia Inserts The price includes all the inserts of the batch Conditi...
Details

Insertos 02PBS0113080 MULTI-USE PLATE SOMT11 Small Widia Plates HELION The price includes all the...
Details

GMM2020-MT inserts PR930 Widia KYOCERA inserts The price includes all the inserts in the batch Co...
Details

External AYMA UT5 Blade 100150L Condition: New
Details

IC12,5 inserts 9588A 12525 Lot of Widia inserts FRANKEN The price includes all the inserts in the...
Details

TPMR inserts 110304HQ Lot of Widia Kyocera inserts The price includes all inserts from the batch ...
Details

Widia Kennametal EG0312M03U02GUP KCU25 Tool Inserts Lot Price includes all inserts from the lot o...
Details

XPHT Inserts 160412S Widia plate inserts batch AYMA The price includes all the inserts from the b...
Details

APKT1604 PDR / PDTR Inserts Lot of Widia AYMA inserts The price includes all the inserts of the 3...
Details

SNMX1206ANN-MM inserts widia The price includes all the inserts of the batch Condition: New Inclu...
Details

Batch Cutting Tools welded for Lathe new - 7 Pieces The price includes all the tools in the batch...
Details

TCMT 16T304 M50 Widia Inserts AYMA Includes 1 box with 5 Units Condition: New
Details

Inserted TCMT 110204 M50 Widia inserts AYMA Includes 1 box with 13 Units Condition: New
Details

inserts 32002 AM35C Widia inserts AYMA The box includes only 4 units Condition: New Application a...
Details

TNMG 160404 and 160408 Inserts Lot Widia AYMA Plaques The price includes all the inserts of the l...
Details

SP300-AF720 Inserts Lot Widia AYMA Chips The price includes all the inserts from the batch of 18 ...
Details

Insert TCMT 16T308 Inserts Batch Widia AYMA The price includes all inserts from the batch of 14 u...
Details

Tool turret toolholder batch for CNC lathe The batch includes all pieces shown in the images; the...
Details

Top Jaw Sets Reversible Kitagawa Hydraulic Plate The batch includes 2 sets of 3 jaws each, the en...
Details

Kitagawa hydraulic lathe jaw set Includes 2 sets of 3 jaws each; the price includes all sets in t...
Details

DIN 6388 spring clamp set 12 pcs Includes clamps of different sizes Measurements: 8 mm / 10 mm / ...
Details

DIN 6388 Spring Clip Set - 10 pcs Includes tweezers of different sizes Measurements: 2 mm / 5 mm ...
Details